Perforated SS Tube

Stainless Steel 304 Perforated Pipe Rack- Circular tube
Perforated tube test tube rack, SS 304
Material specifications:
Tube, 1.5 inches in diameter, made of 304 stainless steel with 1/16 inch perforations, 24 grains in weight, 1/8 inch in diameter, with a 23% open space.
6 feet in length

Tube, 1.5 inches in diameter, made of 304 stainless steel with 3/32 inch perforations, 24 ga. Thickness: 5/32 inch, with a 33% open space.
Standard length (6 feet).

Stainless steel piercing test tube rack can be made of 316 or other grades. The pierces can be round, square, or customized.

Stitching tube for dyeing process

Piercing tube used for dyeing the autoclave.
Inner diameter: 80 mm
Thickness: 5mm
Perforation height: 400 mm
Aperture size: 5mm or 10mm
Perforation pattern: Interlaced
Material: Stainless steel

Indoor sanitation, perforation, stainless steel

The device is used in pipes to penetrate stainless steel pipes with cold ionized water.
Ozone gas is introduced into the water through a jet method, entering a depleted water that is insulated within the tank. Inside the tank, opposite to the surface where the heat exchanger is located, there is an outlet for the enriched ozone water. The tank is approximately 4 meters wide and 4 meters high, and the size of the insulation pipe is 1 inch.
Materials: 316 (Austria) used in tanks
Health connection — ends as a tube or pipe.

Scientific experiments using penetrating tubes
Length: 5 or 6 centimeters, width: 3 centimeters
The thickness may range from 0.05 to 0.1 centimeters
The tube with a small hole, the diameter of which may be 0.2 centimeters
High transmission rate, 70% per minute.
Square or rectangular holes.
Materials: stainless steel or aluminum, copper

Perforated Screen Filter Tube
The following measurements:
40 inches in length
Diameter of 4 and 7/16 inches
1. 55 millimeters 316
Screen hole size: 3.15 millimeters
Upper sleeve 26 42 millimeters
9.69 millimeters central sleeve size
Low sleeve size 17, 31 millimeters

316 Stainless Steel Penetration Screen Tubes

316 SS Perforated Pipe

10/3' OD x#16 GA wall 316 SST perforated pipe
1. Diameter 8', diameter x 3/16' interlaced center
40% of the land is vacant

Suffering stainless steel tube

Perforation tube:
Penetration Pipe ID - 45 millimeters
Diameter of the perforation hole - 2.5 millimeters

Circumferential S.S. Mesh Penetrating Tube

6' caliber S.S. mesh tube
Approximately & frac12;' x 3/16' holes
We also offer structured straight sheets.
Inserted a 6' 6' pipe hole with & frac12;' x 3/16' holes

Stainless steel perforated pipes are also used for vehicle exhaust and disinfection.

The stainless steel pipes/ducts used for penetration have the following characteristics:
1. Easy to clean and reuse
2. Uniform distribution of pore sizes
3. Good air permeability
4. High filtration efficiency
5. Heat resistance
6. High Corrosion Resistance